|
|
| (не показана 1 промежуточная версия этого же участника) |
| Строка 1: |
Строка 1: |
| − | ==Создание загрузочной флешки с Clonzilla==
| |
| − | Взято [https://clonezilla.org/liveusb.php#linux-setup тут]<br>
| |
| − | ===Метод А: Tuxboot===
| |
| − | Загрузите [http://tuxboot.org/ Tuxboot] на ваш Linux компьютер.<br>
| |
| − | Следуйте инструкциям [http://tuxboot.org/installation/ инструкции] для запуска Tuxboot для инсталяции Clonezilla Live на Вашу флешку.
| |
| − | ===Метод Б: Вручную===
| |
| − | Внимание: Прежде чем выполнять команды, убедитесь, что у вас правильный путь!
| |
| − | Невыполнение этого требования может привести к потере данных или к тому, что ваш GNU / Linux не загрузится !!!
| |
| − | Например:
| |
| − | /dev/sdd это путь до диска
| |
| − | /dev/sdd1 это путь до раздела диска
| |
| | | | |
| − | Download the Clonezilla Live zip file.
| |
| − | If you already have a FAT or NTFS partition on your USB flash drive then skip to the next step (3).
| |
| − | Otherwise prepare at least a 200 MB partition formatted with either a FAT16/FAT32 or NTFS file system.
| |
| − | If the USB flash drive or USB hard drive does not have any partition, you can use a partitioning tool (e.g. gparted, parted, fdisk, cfdisk or sfdisk) to create a partition with a size of 200 MB or more.
| |
| − | Here we assume your USB flash drive or USB hard drive is /dev/sdd (You have to comfirm your device name, since it's _NOT_ always /dev/sdd) on your GNU/Linux, so the partition table is like:
| |
| − |
| |
| − | # fdisk -l /dev/sdd
| |
| − | Disk /dev/sdd: 12.8 GB, 12884901888 bytes
| |
| − | 15 heads, 63 sectors/track, 26630 cylinders
| |
| − | Units = cylinders of 945 * 512 = 483840 bytes
| |
| − | Disk identifier: 0x000c2aa7
| |
| − |
| |
| − | Device Boot Start End Blocks Id System
| |
| − | /dev/sdd1 * 1 26630 12582643+ b W95 FAT32
| |
| − |
| |
| − |
| |
| − | Then format the partition as FAT with a command such as "mkfs.vfat -F 32 /dev/sdd1"
| |
| − | WARNING! Executing the mkfs.vfat command on the wrong partition or device could cause your GNU/Linux not to boot. Be sure to confirm the command before you run it.
| |
| − |
| |
| − | # mkfs.vfat -F 32 /dev/sdd1
| |
| − | mkfs.vfat 2.11 (12 Mar 2005)
| |
| − |
| |
| − |
| |
| − | Insert your USB flash drive or USB hard drive into the USB port on your Linux machine and wait a few seconds. Next, run the command "dmesg" to query the device name of the USB flash drive or USB hard drive. Let's say, for example, that you find it is /dev/sdd1. In this example, we assume /dev/sdd1 has FAT filesystem, and it is automatically mounted in dir /media/usb/. If it's not automatically mounted, manually mount it with commands such as "mkdir -p /media/usb; mount /dev/sdd1 /media/usb/".
| |
| − | Unzip all the files and copy them into your USB flash drive or USB hard drive. You can do this with a command such as: "unzip clonezilla-live-2.4.2-32-i686-pae.zip -d /media/usb/"). Keep the directory architecture, for example, file "GPL" should be in the USB flash drive or USB hard drive's top directory (e.g. /media/usb/GPL).
| |
| − | To make your USB flash drive bootable, first change the working dir, e.g. "cd /media/usb/utils/linux", then run "bash makeboot.sh /dev/sdd1" (replace /dev/sdd1 with your USB flash drive device name), and follow the prompts.
| |
| − | WARNING! Executing makeboot.sh with the wrong device name could cause your GNU/Linux not to boot. Be sure to confirm the command before you run it.
| |
| − |
| |
| − | NOTE: There is a known problem if you run makeboot.sh on Debian Etch, since the program utils/linux/syslinux does not work properly. Make sure you run it on newer GNU/Linux, such as Debian Lenny, Ubuntu 8.04, or Fedora 9.
| |
| − |
| |
| − | TIP: If your USB flash drive or USB hard drive is not able to boot, check the following:
| |
| − |
| |
| − | Ensure that your USB flash drive contains at least one FAT or NTFS partition.
| |
| − | Ensure that the partition is marked as "bootable" in the partition table.
| |
| − | Ensure that the partition starts on a cylinder boundary.
| |
| − | For the first partition this is usually sector 63.
| |
